Maintenance
Cleaning
• Disconnect the Baby Bottle Warmer from the mains socket
and allow it to cool down. Clean the container and the
outside of the Baby Bottle Warmer with a damp cloth.
Notes: – Never immerse the Baby Bottle Warmer in water.
– Do not use cleaning or scouring agents.
Warning: If a fault occurs, consult a Philips’ service centre. Under no
circumstances should you try to repair the Bottle Warmer
yourself; do not dismantle. Servicing should be performed by
qualified service personnel only.
Technical Specifications
Power supply (mains): 220-240V AC
Power consumption (mains): 250 Watts
Operational ambient temperature: between +7°C and +37°C
Protection: PTC temperature controlled
heating system
Problem solving
Problem Solution
Temperature too low. • Turn the click-step control knob
4 to the right until the indicator
lamp lights up red to start the
heating up again.
• Check ring filling and start
temperature.
Temperature too high. • Lower the adjustment setting.
• Check ring filling and start
temperature.
ENGLISH8
