Filter
Top Products
7 Shake the bottle a little bit to distribute the heat evenly
before you allow your baby to drink.
8 Check that the contents of the bottle are the correct
temperature by pouring a few drops on the back of your
hand.
Notes!
– The ring ensures that the hot steam heats up the bottle extremely
fast to the right temperature.Warming the bottle without the ring,
might result in a wrong temperature, therefore never use the bottle
warmer without the ring.
– The dimensions of the bottle or the material of the bottle (glass in
stead of plastic) may influence selecting the correct knob setting.
Therefore always control the end temperature and adjust the setting
of the knob.
Warning! When you leave the bottle in the bottle warmer after it is
heated up, the temperature might increase a few degrees.
Warming baby food jars
1 Turn the click-step control knob 4 to the left to the
‘0’ (OFF) position.
2 Connect the bottle warmer to the mains socket.
> The indicator lamp lights green.
3 Remove the label and lid from the jar.
4 Fill the beaker with 20ml water by using the water cup of the
ring.
5 Place the jar in the middle of the container and put the ring
on top of it.
6 Set the click-step control knob to the symbol.
> The indicator lamp lights red.
> When the right temperature is reached the indicator lamp
will light green.
ENGLISH6
SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 6