Filter
Top Products
14 Pelco Manual C332M-D (10/98)
7.0 SPECIFICATIONS
GENERAL
Construction: Aluminum plate, all internal parts corrosion protected
Dimensions: See Figure 7
Environment: Indoor/outdoor
Temperature: -10°F to 140°F (-23° to 60°C)
Weight
Unit: 22 lb (9.9 kg)
Shipping: 25 lb (11.5 kg)
MECHANICAL
Pan
Horizontal
Movement: 0-355°
Speed: 6°/sec ±1° (no load condition)
Frame scan duration is adjustable from 2-9 seconds (factory
set at 4 seconds)
Torque: 10 ft lb with specified voltage
Tilt
Vertical
Movement: ±90°
Speed: 3°/sec ±.5° (no load condition)
Torque: 20 ft lb with specified voltage
Maximum Load: 40 lb (18.14 kg) at 5 inches (12.7 cm) from tilt table surface to
center of gravity
Gearing: Adjustable worm gear final drive
Bearings: Heavy-duty ball bearings (pan)
Oilite bronze bushing (tilt)
Braking: Mechanical friction-type
ELECTRICAL
Input Voltage: 24 VAC, 50/60 Hz (PT573-24R)
120 VAC, 50/60 Hz (PT573R)
Power
Requirements: Running
24 VAC Unit 120 VAC Unit
Pan .9 amps .18 amps
(21.6 vA) (21.6 vA)
Tilt .9 amps .18 amps
(21.6 vA) (21.6 vA)
Starting
24 VAC Unit 120 VAC Unit
Pan 1.35 amps .27 amps
(32.4 vA) (32.4 vA)
Tilt 1.35 amps .27 amps
(32.4 vA) (32.4 vA)