Filter
Top Products
17MENU SETTINGS
Set the time
2. Press [ OK ] key and "Set time" is shown on the display.
Press [ OK ] key.
3. "Year" is shown on the display. Use [
/ ] keys to
select the correct year. Press [ OK ] key.
4. "Month" is shown on the display. Use [ / ] keys to
select the correct month. Press [ OK ] key.
5. "Day" is shown on the display. Use [ / ] keys to
select the correct day. Press [ OK ] key.
6. "Hour" is shown on the display. Use [ / ] keys to
select the correct hour using the 24 hour clock. Press
[ OK ] key.
7. "Minute" is shown on the display. Use [ / ] keys to
select the correct minute. Press [OK] key and "Saved"
is shown on the display.
Set the hour format
Use [ / ] keys to select "Hour Format", press [ OK ] key,
"12Hrs?" or "24Hrs?" is shown on the display, press [ OK ]
key to select 12 hours or 24 hours clock format.
Time displayed in the 12 hour clock format will include a
small "a" to denote AM and a small "p" for PM.
Feed Time Setting
If your baby is in a routine of regular feeding intervals, you
may wish to set your Baby Monitor to alert you when your
baby's feeds are due. You have the choice to either set an
alert just for your baby's next feed time, or for your baby's
next feed time plus subsequent feeds based on the interval
time between them.
Firstly you will need to ensure that you have set the date
and time on your Parent Unit's inbuilt clock.
Once you have done this, you can either:
1. Set the Time of day or night (24hr clock) at which your
baby's next feed is due (eg. 10.30) and then if you wish,
2. Set the Interval between your baby's following feed start
times, (eg. every 3hrs 30mins), be sure to include the
time it takes to feed your baby.
3. Finally, you will need to switch the Feed Alarm on. Now,
when your baby's next feed is due, your Parent Unit will
start beeping and the Display will show "Feed Alarm".
Pressing any button on the Parent Unit will silence the
alert and you can feed your baby. If you have set the
interval, the alert will sound again when the next feed is
due.
Press [ ] key on the parent unit and use [ / ] keys to
select "Feed Time", the display is shown below: