Filter
Top Products
Step One
SPECIFICATIONS
Orientation:
Accuracy:
Repeatability:
Supply voltage:
Consumption:
Contact type:
Contact rating:
Contact output:
Process temp.:
Pressure:
Sensor rating:
Cable type:
Cable length:
Process mount:
Mount. gasket:
Classification:
CE compliance:
Universal
±
1 mm in water
±
0.5 mm in water
12-36 VDC
25 mA maximum
(1) SPST relay
GP: 120 VAC/VDC @ 1A
(CE: 60 VAC/VDC @ 1A)
Selectable NO/NC
F: -40˚ to 194˚
C: -40˚ to 90˚
150 psi (10 bar) @ 25˚
C., derated @ 1.667
psi (.113 bar) per ˚C.
above 25˚ C.
NEMA 6 (IP68)
4-conductor, #22 AWG
(shielded)
Standard: 10' (3m)
3/4" NPT (3/4" G / Rp)
Viton® (G version only)
General purpose
EN 50082-2 immunity
EN 55011 emission
EN 61010-1 safety
Sensor material:
Cable jacket mat.:
PP-Ryton® (glass fill)
PP
Sensor material:
Cable jacket mat.:
-150/-152: PP
-151/-153: PFA
-150/-152: PP
-151/-153: PFA
Dielectric range:
Conductive range:
Sensor material:
Cable jacket mat.:
> 20 constants
> 100 micromhos
PP
PP
Dielectric range:
Conductive range:
Sensor material:
Cable jacket mat.:
> 20 constants
> 100 micromhos
-101/-103: PP
-102/-104: PFA
-101/-103: PP
-102/-104: PFA
Sensor material:
Cable jacket mat.:
-210/-212: PP
-211/-213: PFA
-210/-212: PP
-211/-213: PFA
Common Specifications:
LVC-152 series Specifications:
LTU-101 series Specifications:
LVU-150 series Specifications:
LVF-210 series Specifications:
LVC-100 series Specifications:
Acetone 21
Acetoaldehyde 22.2
Acetyl methyl hexyl
ketone 28
Alcohol 16 to 31
Ammonia 15 to 25
Acetic acid 4.1 to 6.2
Butyl chloride 9.6
Barium chloride 9 to 11
Benzene 2.3
Benzine 2.3
Barium nitrate 5.6
Bromine 3.1
Chlorobenzene 4.7 to 6
Chlorotoluene 4.7
Chloroform 4.5 to 5.0
Chlorine, liquid 2.0
Carbon tetrachloride 2.2
Cyan 2.6
Cyclohexane methanol
3.7
D.I. Water 20
Ethyl toluene 2.2
Ethyl alcohol 23
Ethylene glycol 37
Ethylene oxide 14
Ethylene dichloride
11 to 17
Ethylene chloride 10.5
Ethyl acetate 6.4
Ethyl salicylate 8.6
Ethyl stearate 2.9
Ethyl silicote 4.1
Formic acid 59
Ferric oleate 2.6
Freon 2.2
Glycerine 47
Glycol 30
Glycol nitrite 27
Gasoline 2 to 2.2
Hydrochloric acid 4.6
Isobutyric acid 2.7
Isobutyl methyl ketone
13
Jet fuel 1.7
Lead carbonate 18
Lead nitrate 38
Methyl salicylate 9.0
Methanol 33
Methyl alcohol 33 to 38
Margarine, liquid
2.8 to 3.2
Methyl acetate 7.3
N-butyl formate 2.4
Nitrobenzene 26 to 35
Nitrotoluene 25
Naphthalene 2.3 to 2.5
Oils, vegetable2.5 to 3.5
Oils, mineral 2.3 to 2.4
Oils, petroleum
1.8 to 2.2
Oleic acid 2.5
Propane, liquid
1.8 to 1.9
Potassium nitrate
5.0 to 5.9
Potassium chloride 5.0
Stearic acid 2.3
Toluene 2.4
Trichloroethylene 3.4
Trichloroacetic acid 4.5
Terephthalic acid
1.5 to 1.7
Thinner 3.7
Urea 3.5
Vinyl chloride 2.8 to 6
Vinyl alcohol 1.8 to 2.0
Water, 20°C 80
Water, 100°C 48
Table of Common Dielectric Constants
NOTE: Liquids with a dielectric constant less than 20 will not be detected by an LVC-152 series or LVC-100 series level switch, as
factory calibrated.