Filter
Top Products
LUBRICATION
WARNING: SHUT OFF AND LOCK OUT
POWER BEFORE CLEANING, ADJUSTING, LUBRI
-
CATING OR SERVICING THIS MACHINE. FAILURE
TO HEED MAY RESULT IN SERIOUS PERSONAL IN
-
JURY OR DEATH.
DAILY LUBRICATION
(every 8-10 loads)
Oil (3) roller chains on apron drive. This is done by
opening the ball valve on the gravity oiler while
unloading, once per day.
WARNING: DO NOT STAND BEHIND UNIT
WHILE PERFORMING THIS OPERATION.
Refillthe gravityoileratthe beginningofeach day.
Grease three jackshaft bearings on the rear
driveshaft (each end, one @ center).
Oil (4) rear gate latch pivot bolts.
Grease (3) main apron shaft bearings.
END OF CROP CLEANUP AND
MAINTENANCE
Allow box to completely clean out last load of forage.
Clean out all forage material from inside the box and on
the outside of the box.
It is recommended to lube theforage box before storage
to exclude moisture from bearings. Apply oil to roller
chain drives with the gravity oil luber and to the main
apron chains with a brush.
Itis alsoagood timetoinspectall adjustmentsandcheck
for parts that need repair or replacement. Performing
these tasks now will guarantee that the forage box is
ready for use at the beginning of the next season.
--12-- 8100 Rear Unload