Filter
Top Products
Instructions for use
• The seat must always be secured with a seat belt, even when not in use. An unsecured seat may injure other
passengers in the car in the event of an emergency stop.
• Ensure that the Priori XP is not damaged by wedging it between or underneath heavy luggage, adjustable seats or by
slamming the car door, etc.
• No alterations may be made to the Priori XP, as this could affect part or the overall safety of the seat.
• Always cover the Priori XP when the car is parked in the sun, as plastic and metal parts may become extremely hot
and the fabric unnecessarily discoloured.
• In order to prevent damage to the cover, do not remove the logos.
• Always use the seat, even on short journeys, as this is when most accidents occur.
• Prior to purchase, check to make sure the seat fits properly in your car.
• Take short breaks on longer journeys so that your child has some freedom of movement.
• Set a good example and always wear your seat belt.
• Tell your child that he/she should never play with the belt buckle.
Questions
Contact your supplier or importer if you wish to make a warranty claim or have any other questions (see address list
on the back of the instruction manual).
The seat belt
The Priori XP may only be used with an automatic 3-point safety belt (01).
• The Priori XP can be fitted safely in a forward-facing position on almost all seats in the car using the existing seat
belts. However, on some seats, the belts are fitted so far forward that proper installation is not possible. If this is the
case, try another seat.
• In some cases, the buckle of the car belt may be too long and therefore sits too high against the base of the Priori
XP. The Priori XP can therefore not be fitted securely. If this is the case, choose another position in the car (02).
Questions? Contact your supplier or importer.
Four positions of the Priori XP
The Priori XP may be used in four positions: Lift the adjusting handle under the front of the seat up (03) and push or
pull the seat forwards or backwards (04). Release the adjusting handle in the desired position and push until you hear
a distinct click. Before installing the Priori XP, pull the seat towards you as far as possible (sleeping position) (05).
Installing the Priori XP
Please read the "Seat Belt" section before installing the Priori XP.
• Place the Priori XP on the car seat in the sleeping position (05).
• Release the belt tensioner. To do so, push the tab under the handle downwards and open the handle.
The handle will now visibly protrude from the base (06). The belt tensioner should no longer be positioned between
the red belt hooks (07).
• Thread the seat belt between the shell and the base. Make sure that the lap belt section of the seat belt is threaded
between the red hooks and the belt tensioner (08).
• Fasten the seat belt in the belt buckle of the car (08) and check to ensure the car seat belt is not twisted.
• The lap belt should now run under the red seat belt hooks (09) and the shoulder belt should run from the car seat
buckle directly diagonally upwards. Place the shoulder belt in the belt clamp (10) on one side only and fasten it
(11/1). IMPORTANT: The shoulder belt is now attached on the side of the roll-up mechanism only. The belt clamp is
now locked.
• Next, push the Priori XP firmly into the car seat (11/2) whilst at the same time pulling the shoulder belt tight (11/3),
so that the Priori XP is securely in place. Check this!
9
GB
gba-priori-1-xp-HAE..-bw 17-06-2005 11:04 Pagina 9