Filter
Top Products
Knowing Your Vehicle Belts
Belt-Positioning Booster Use
This belt-positioning booster must only be used in vehicles with appropriate vehicle
belts that can be tightened securely. If the vehicle belt cannot be tightened securely, it must
be replaced. This booster MUST only be used with a lap/shoulder belt. Belt systems which
will not work with this child auto booster (or sometimes any child restraint) include, but
are not limited to, the following:
• Do not use with any automatic/passive vehicle seat belt. An automatic (passive) 2-point
belt has no lap belt. You must install a lap belt to secure a car seat. You may also need
to install an extra lap belt for an automatic (passive) 3-point belt. Refer to the vehicle
owner’s manual.
• If your vehicle belt is too short, contact your vehicle dealer for a seat belt extender. Do
not route the seat belt any way except as shown in the instructions.
• You must move the auto booster to another seating location if the belts come out of the
center of the door or side panel (A); or if the buckle is in the middle of the vehicle seat cushion
(so that they are forward of the bight) (B).
A
B
Booster with Backrest
30-100 lbs (13.6-45.4 kg)
34-57 in. (85.1-144.8 cm)
and Over 1 Year Old.
Vehicle lap/shoulder belt
combination.
Child and child restraint face
the front of the vehicle and are
placed in the back seat.
Booster without Backrest
40-100 lbs (18.1-45.4 kg)
43-57 in. (110.1-144.8 cm)
and Over 1 Year Old.
Vehicle lap/shoulder belt
combination.
Child and child restraint face
the front of the vehicle and are
placed in the back seat.
Know Your Vehicle Belts
Some vehicle belts will not
work with a child restraint.
See previous page for specific
instructions.
11
12
4358-4583 US Rodi XR 8/26/08 11:41 AM Page 13