Filter
Top Products
24
1. For ease of installation,
extend UAS to its
maximum length.
2. Place the car seat firmly
against the back of a
forward-facing vehicle
seat.
3. Thread UAS
through the belt
path normally used
for the vehicle seat
belt
.
Belt must lay flat
and not be twisted.
4. Hook UAS Connectors
to vehicle lower anchors.
Pull firmly on Connectors
to be sure they are
attached
.
5. Tighten UAS by
pushing down hard on
car seat and pulling the
adjustment belt
.
6. NEVER put two UAS
connectors on one
vehicle UAS anchor
unless specifically
allowed by the
manufacturer
.
6.2.2 With UAS