VS-GSWG Swing Gate Operator Installation Guide
- 27 -
P1250 Revision X6 7-8-2011
MODEL SWG MECHANICAL PARTS LIST
REF. # PART # DESCRIPTION
2120-361 Complete Enclosure Assembly with Door
1 2110-067 Enclosure Assembly without Door
2120-362 Enclosure Door and Lock Assembly
2110-643 Snap Lock Assembly only
2 2110-161 Mounting Panel Assembly
3 2100-708 Side Support Bracket
4 2100-656 Side Plate, 3/8”
5 2200-264 Pillow Block Bearing
6 2100-766 Drive Shaft, 1-1/8” diameter
8 2400-278 Key, 1/4” x 1/4” x 2-1/2”
9 2200-595 Torque Limiter, 5”
2300-381 Torque Limiter Facing, 5”
10 2200-583 Sprocket, 40-A-36, 3” bore
11 2210-009 Sprocket, 48-B-30, 1-1/8” bore
13 2100-1112-PLT Moisture Seal Spacer (2)
14 2200-016 Moisture Seal
15 2400-067 Seal Washer, 1” x 2-1/2”
18 2200-097 Gear Reducer, 60:1
19 2200-968 Sprocket, 40-B-22, 1” bore
20 2100-735 Limit Box Mounting Plate
21 2520-453 Rotary Limit Box Assembly
22 2200-008 Sprocket, 48-B-10, 1/2” bore
23 2200-459 #40 Roller Chain, 27 1/2 Links
24 2200-006 #40 Master Link
25 2200-200 #48 Roller Chain, 27 Links
26 2200-010 #48 Master Link
27 Complete Controller Assembly
28 2200-409 Pipe Nipple
29 2100-1414 Reducer Plate
30 2100-1413 Reducer Plate Spacer
2200-428 Reducing Coupling
2200-429 Pipe, 1/4” x 3 1/2” THD, both ends
2400-264 Pipe Plug, 1/4”
2510-064 Three-Button Station with Lead Wires
2500-033 Three-Button Station only
31 2400-514 Retaining Ring Clip
C-Face Motors
17
2500-2313 1/2 HP, 208/230/460V, 3 Phase
2500-2315 1 HP, 208/230/460V, 3 Phase
2500-372 2 HP, 208/230/460V, 3 Phase