LG Electronics 42LY560H Model Vehicle User Manual


 
34
206-4258
(Continued on next page)
Cloning Procedures
Learning Configuration from a Master TV
This section describes how to Learn conguration from a Master TV.
Before You Begin
• If the TV is NOT already in FTG Mode, complete the Custom Master TV
Setup procedure (see pages 31 to 33).
• Ensure the USB device has been formatted with FAT format.
• If you would like the Target TV(s) to remain in Pass-through Mode after
Teaching, ensure the Master TV does not have an auto-tuned/edited
channel lineup; otherwise, Teaching will result in the Target TV(s) being
congured for FTG Mode.
• If you intend to use the TV Zoning feature, make sure to assign the
appropriate TV Zone # as described in Reference section, “Using the TV
Zoning Feature,” BEFORE performing the Learning procedure.
• It is not possible to clone a Master TV’s clock. Either set a Target TV’s
clock manually, or use the Auto Clock setting in the TV setup menus.
Caution: Do not unplug the TV power cord or remove/disconnect
the USB memory device while Learning, as doing so may cause
the TV to malfunction or harm the USB device, respectively.
Learn Conguration from Master TV
1. Ensure the Master TV is set up completely and turned ON.
2. Insert the USB memory device into the USB port on the Master TV.
3. Press MENU SETTINGS on the Installer Remote to display the TV
setup menus (TV is in Pass-through Mode) or the Function Menu (TV is
already in FTG Mode).
4. Use the arrow navigation keys to select/highlight either the Option menu
icon from the TV setup menus or the Lock menu icon from the Function
Menu. Then, press the number “7” key a total of seven times to display
the TV Manager / USB Download Menu.
5. To gain access to the “Learn From TV” option in the TV Manager / USB
Download Menu, key in the following number sequence on the Installer
Remote: 9-8-7-6.
6. Use the Up/Down arrow keys to select Learn From TV (TLX), and then
press OK.
Learn From TV (TLX)
Previous
OK
Select the le name and press OK to start
xxLY560H-UA00001.TLX
TV Manager
USB
Diagnostics
Previous
OK
Ez Download
Logo Image Download
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLX)
Learn From TV (TLX)
Learn From TV (TLX)... 25
%
Do not remove the USB from the port! Do not unplug!
xxLY560H-UA00001.tlx
Cloning typically refers to the process of capturing a Master TV Setup and transferring it to a
Target TV. This section describes how to save (Learn) a Master TV Setup and transfer (Teach) it
to a Target TV using a USB memory device / TLX le.
You can also create a TLX le using the FTG File Manager and then use the Teaching procedure
to transfer the TLX le to Target TVs. Refer to “Creating an FTG Conguration File” on pages 38
to 39, as necessary.
Note: TV Manager / Diagnostics
is for service use only.