LG Electronics 37LT670H Model Vehicle User Manual


 
38
206-4213
FTG Mode of Operation Overview (Cont.)
PICTURE
AUDIO
INPUT
OPTION
TIME
MY MEDIA
CHANNEL
LOCK
TV Setup Menus
Shows that the TV is in
Pass-through Mode .
Function Menu
Indicates the TV is not in Pass-through
Mode . While the TV is in this mode,
Installer Menu settings can be
accessed as read-only.
ABC
ASPECT RATIO
OK
Move
16:9
Just Scan
Set By Program
4:3
Zoom
While the TV is in FTG Mode:
• Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu
items will be read-only.
• Any FTG conguration changes must be made using either the FTG File Manager (FTG Mode via CPU) or
the FTG Device Conguration Application (FTG Mode via EBL). FTG Channel Map Conguration and FTG
Installer Menu Conguration Utilities enable you to make changes, respectively, to the FTG Channel Map
and FTG Installer Menu settings as necessary. Based on the initial method used to congure the TV for
FTG Mode operation (via CPU or EBL), all subsequent changes must be transferred to either the TV CPU
or the EBL via a process that is in accordance or compatible with that method (see information on local
conguration in this document or refer to documentation for the head end device/server for information on
remote management).
• If it becomes necessary to reset the TV to Pass-through Mode, there are several options that will enable
you to do so. Refer to Reference section, “Restoring Factory Defaults on the TV(s),” for further information.
Pages 45 to 48 provide overviews of the utilities that comprise the FTG File Manager. Refer to the Free-
To-Guest (FTG) File Manager User Guide for further information on the FTG File Manager. Refer to the
Free-To-Guest (FTG) Device Configuration Application User Guide for information on the FTG
Device Configuration Application.
Determining the TV Operating Mode
To determine the operating mode of the TV, press MENU on the Installer Remote. The menu displayed
depends on the operating mode. See examples below.
If the Function Menu appears, the TV is in a mode (FTG, PPV, etc.) that does not allow the end user to
change the fundamental TV setup. If the TV setup menus appear, the TV is in Pass-through Mode.