Filter
Top Products
8. With the notched end of the SO-DIMM toward the contact edge side of
the socket, firmly insert the SO-DIMM into the socket at an angle of
about 20 degrees 1, then press it firmly 2.
1
2
2
1
9. Push the SO-DIMM down until it snaps into place.
10. Make sure that the memory module is firmly fixed in the slot and does
not move easily.
11. Reinstall the cover of the memory slot by aligning the front side of the
cover first 1, and closing the cover2. Then tighten the two screws
3.
2
3
1
1
3
Attention: When you have replaced the SO-DIMM, do not use your
computer until you have closed the memory slot cover. Never use the
computer with the cover open.
Replacing memory
Chapter 5. Upgrading and replacing devices 31