Filter
Top Products
7
7
6
4
3
1
2
5
The importance of a close inside look
Mowers conditioners
FC 302 - FC 352
Some mower conditioners
may look like a Kuhn
machine from the outside!
However, close inspection
will show distinctions that
will make all the differen-
ce in the long run. With a
KUHN mower conditioner,
careful design and quality
construction materials and
techniques leave nothing
to chance.
Before you choose your equipment, have someone explain how
we have designed what you can’t see inside the machine!
Withstands the highest loads: high capacity bearingsfitted in a one piece
sealed housing not subject to distorsion.
Protection should an obstacle be struck: the PROTECTADRIVE
®
system
protects the cutterbar gear train and minimizes down-time risks in full season.
Long-term functioning: large diameter gearwheels in high tensile forged steel
with reinforced teeth.
Perfect sealing: o-rings used on cutterbar bearing housings for a perfect,
leak-free seal.
Increased service life: disc pinion shaft bearings endure radial forces for
longest bearing life. This optimum position improves the load balance.
Minimum wear or distortion risks: idler gear fasteners are located in heat
treated steel cups. Correct alignment is ensured without the risk of distortion.
Highly wear resistant: knife attachment hardware is fully protected. For added
safety, heat treated steel cups are welded to the disc.
1
2
3
4
5
6
7
Detailed view of Kuhn mower conditioner cutterbar components