Filter
Top Products
Safety foot
To open walk through section, press down on
top locking latch, lift walk through section so
hinge is raised (a), and slide out of bracket.
Note: The gate should always be in locked
position. If gate is open and excessive
pressure is applied, hinge posts are desig-
ned to break to prevent structural dama-
ge.
To close gate, lift walk through section and
position safety foot onto frame, making sure
hinge has dropped down (b). To lock gate,
latch spindle at top must click under locking
latch.
l No part of gate needs lubrication.
*
Clean by sponging with warm water and
mild detergent.
l Do not use abrasive cleaners or bleach.
l If using out doors, and to help prevent rust,
treat all exposed metal on gate with a rust
inhibitor. Some rusting may still occur.
9