Filter
Top Products
To open gate, press down on locking latch
with thumb, lift gate and slide out of upper
and lower locking brackets.
Note. Gate should always be in locked
position. If gate is open and excessive
pressure is applied, hinge posts are desig-
ned to break to prevent structural dama-
ge.
To lock gate, latch spindle at top must click
under locking latch when in closed position.
Bottom latch spindle must rest in bottom
bracket.
* No part of this gate requires lubrication.
l Clean by sponging with warm water and
mild detergent.
l
Do not use abrasive cleaners or bleach.
l
If using outdoors, and to help prevent rust,
treat all exposed metal with a rust inhibi-
tor. Some rusting may still occur.
9