Kalorik EKS 40758 Building Set User Manual


 
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame,
5 EKS 40758 - 120501
Assembly page 5/36
Fax
+1 305 430 9692
After inserting the batteries, the unit will enter the year setting automatically.
Else press the “T-mode” button for 3 seconds to enter the setting mode.
Press the “up” or “down” arrow buttons to adjust the Year value, and “T-
set” button to confirm.
The unit then enters the Month setting mode. Press the “up” or “down”
arrow buttons to adjust the value, and “T-set” button to confirm …
The setting mode switches then to the day / hour / minute setting mode.
Adjust values as needed and validate with “T-Set” button each time.
To fast-scroll through the values, leave your finger for more than 2
seconds on the “Up” or “Down” arrow buttons.
The scale then switches in the “Real Time Display” mode.
START WEIGHING
Put the scale on an even and hard surface, for instance a table or
countertop. Avoid soft surfaces.
When the scale is in the real time display, press “Mode” to enter the
weighing or volume mode. The value in the middle shall indicate “0”.
If the display indicates the weighing mode, you can start weighing
directly. If the display shows the milk or water volume mode, press the
“Unit” button shortly until in the weighing mode. The LCD display will
show “0 g” or “0:0.0 lb:oz.”.
Put the object you want to weigh on the scale. The stabilized weight is
displayed. In the imperial weighting mode, the weight is indicated in US
pounds (lb.), US ounces (oz.) and tenth of ounces. (for example the
weight display 2:3.2 means 2 lb., 3Oz. and 2/10 oz.).
If using a bowl or container for example, press on “Z/T” button to reset to
zero and then add the object to weigh in the bowl or container (see
TARE FUNCTION below for more details)
Remove the object from the platform.
The scale will revert to “Real time mode” automatically 2 minutes after
the scale remains idle.
WEIGHT AND VOLUME UNITS
Your scale allows you to use the metric measurement system (grams,
milliliters) or the imperial system (pounds; ounces, fluid ounces). Choose the
measurement system at any time by pressing the “UNIT” button for more
than 2 seconds, depending on the measurement system you wish to use.