Filter
Top Products
OPERATING
24
p/n GH 19502091
Mowing on sloping ground
Figures 41 and 42 show various types of mowing on sloping
ground (banks, canals, etc.).
+90
-75
CAUTION: For mowing on surfaces that are not
parallel to the tractor plane, we recommend
removing the moving guide from the outer
mowing bar support.
To mount pulling of Figure 43 in order to improve
the excursion and use of the sickle bar.
For mowing on sloping ground, disable the lifting device (V)
as shown in Figure 44 and couple the lever (W, Fig. 44) with
tie rod (Z, Fig. 44) and the rod (X, Fig. 44) in position (Y, Fig.
44) as shown in Figure 44.
In this way the bar can be adjusted with the hydraulic cylinder
to mow at different angles: from -75° to +90° with respect to
the horizontal plane formed by the tractor (Fig. 45).
IMPORTANT:
The sickle bar can operates in each position between
-75° to +90°.
Fig. 42
Fig. 43
Fig. 44
Fig. 45
Fig. 41
Z
Y
X
V
W