Part No 1167481 5 Dual Release Walkers
4 Care and Maintenance
1. Regular cleaning of the walker is recommended. Wipe all surfaces with a damp cloth and allow all surfaces
to dry before use.
2. Regular inspection of parts including hardware, brackets, and plastics, for deformation, corrosion,
breakage, wear or compression is recommended. Replace the walker if any of these conditions exist.
3. Ensure the handgrips DO NOT twist on side frame. The handgrips MUST be tight
. DO NOT use the
walker if the handgrips are loose. Replace the walker if the handgrips are loose on the side frame(s).
4. If rubber tips are worn or cracked, replace the rubber tips IMMEDIATELY.
5 After Use
5.1 Disposal
When the product can no longer be used, the product, accessories and the packaging materials should be
sorted correctly.
Please be environmentally responsible and recycle this product through your recycling facility at its end of life.
5.2 Reuse
Maintenance should be done at least every six months.
DO NOT use an abrasive detergent, cleaner or cloth to clean or dry the walker.
ƽ
WARNING: Risk of Injury
Always have a dealer inspect the product for damage before transferring the product to a
different user. If any damage is found, DO NOT use the product. Otherwise injury may occur.