HoMedics SC-902 Building Set User Manual


  Open as PDF
of 16
 
2322
PRODUCT SPECIFICATIONS
1. Bioelectrical Impedance Analysis (BIA) technology for body fat and total body
water percentage, calorie intake estimations and muscle mass percentage
estimations
2. High precision STRAIN GAUGE technology for weight measurement
3. Athlete (for ages 15-85 years) or Normal Mode selection
4. 8 - user memories
5. 3 - button operation
6. Auto-on and auto-off functions
7. Power saving LCD readout
8. Low battery indicator
9. Capacity: 400 lb, 180 kg, 28 st :5 lb
10. Graduation: 0.2lb or 0.1kg
11. Body fat graduation: 0.1%
12. Body water graduation: 0.1%
13. Muscle mass graduation: 0.1%
14. Age range from 10 to 85 years
15. Height range from 3'3.5" to 7'2.5" (100 to 220 cm)
16. Body fat range: 5% to 60%
17. Total body water range: 43% to 73%
18. Operates with 3 AAA batteries (included)
19. Product dimension: 11.8”×11.8”×0.9” (300×300×23.9mm Approx.)
20. Gift box dimension: 14.7”×14.3”×1.7”(374×364×43mm Approx.)
21. Product weight: 3.5 lb(1.59 kg Approx.)
22. Total weight (product &gift box): 5.27 lb (2.39kg Approx.)
23. Accuracy of weight measurement: 5 ~ 50kg ~ ±0.3kg ~ 50 ~100kg ~ ±0.4kg ,
100 ~ 150kg ~ ±0.5kg ~ 150 ~ 180kg ~ ±0.7kg
24. Output power for Body Fat Analyzer: <300uA
25.WorkingEnvironment:Temp:0ºCto40ºC/Humidity:≤90%RH/Pressure:86-106kPa
26. Storage Environment: Temperature: -20ºC to 60ºC Humidity: 10%RH to 93%RH
PROBLEM SOLVING
1. You must have bare feet to take this measurement. In order to get the most
accurate and consistent reading, wipe your feet with a damp cloth, leaving
them slightly damp before stepping on the scale. Repeat measurement again,
maintaining maximum contact between your feet and the metal electrodes.
2. The condition of the skin on the bottom of your feet can affect the reading. The
natural effects of aging or activity can make this skin hard. If you are having a
problem operating this scale, please contact customer service.
3. Move your scale to a location where it will not be bumped. If your scale is
bumped while being activated or while in use, an inaccurate reading will
occur.Initializethescalebypressingrmlyonthescaleplatformtoturnonthe
scale. The display shows zero and then turns off. The scale is ready for use.
4.Placescaleonat,hardsurface.Carpetedorunevenoorsmayaffect
accuracy.
5. Make sure the batteries are properly installed. If the LCD is blank, shows “Lo” or
turns off quickly, replace all the batteries.
6. If the scale does not show body fat, total body water, muscle mass and calorie
estimates:
a) You must have bare feet for estimation results. Remove your shoes and socks
before proceeding. Clean, slightly moist feet will provide the best results.
Position your feet for maximum contact with the metal electrodes on the
platform.
b) The scale cannot identify the possible user memory number with the most
similarweightreading.Pleaseassignyourpersonalproledataintoa
memory number, following the instructions in the section “SET UP YOUR
PERSONAL PROFILE”.
c) The user did not choose one of the memory numbers displayed (P1, P2, etc.).
Pleaseassignyourpersonalproledataintoamemorynumber,followingthe
instructions in the section “SET UP YOUR PERSONAL PROFILE”, then choose the
correct number when it appears on screen.
7. Problem Solving if data transmission fails:
a) Bluetooth® is OFF. Turn ON your devices Bluetooth® function.
b) The app is CLOSED. Press the SmarTrack™ icon to turn OPEN your app.
c) Out of range of Bluetooth® transmission (3 to 30 feet). Place your phone or
other mobile device closer to the scale.
d)Nodataassignedtoamemorynumber.Pleaseassignyourpersonalprole
data into a memory number, following the instructions in the section “SET UP
YOUR PERSONAL PROFILE”.
 previous next