Filter
Top Products
Hardware and firmware requirements 4
Hardware and firmware requirements
HP Virtual Connect Manager firmware
The latest HP Virtual Connect Manager firmware package (version 1.20) contains the following firmware
versions:
• HP 1/10Gb VC-Enet version 1.20
• HP 4Gb VC-FC version 1.10
IMPORTANT: The VC-Enet module firmware must be updated to version 1.20 before updating
the VC-FC module firmware. Otherwise, the VC-FC firmware might not appear to be
successfully updated.
Supported hardware
Version 1.20 of HP Virtual Connect firmware supports the following hardware:
• Virtual Connect modules
o HP 1/10Gb Virtual Connect Ethernet Module
o HP 1/10Gb-F Virtual Connect Ethernet Module
o HP 4Gb Virtual Connect Fibre Channel Module
• Server blades and workstation blades
o HP ProLiant BL460c Server Blade
o HP ProLiant BL480c Server Blade
o HP ProLiant BL465c Server Blade
o HP ProLiant BL680c G5 Server Blade
o HP ProLiant BL685c Server Blade
o HP ProLiant xw460c Blade Workstation (only the two embedded Ethernet ports are supported;
Ethernet and Fibre Channel mezzanine cards are not supported)
• Enclosures
o HP BladeSystem c-Class c7000 Enclosure with Onboard Administrator
o HP BladeSystem c-Class c3000 Enclosure with Onboard Administrator
• Integrated Network Interfaces and mezzanine cards
o HP BladeSystem Dual NC370i Multifunction Network Adapter
o HP NC373i Integrated Multifunction Gigabit Server Adapter
o HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
o HP NC326i Integrated Dual Port PCI Express Gigabit Server Adapter