Filter
Top Products
Page 6SKU 95641 For technical questions, please call 1-800-444-3353.
let the Twin 380 Motors (8A and 8B) as well as both Drive Shafts (6B and 6C) cool
at least 15 minutes before touching.
Do not recharge the Battery Pack (16) if it is hot.15.
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric shock.
Check with a qualied electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool.
Never remove the grounding prong from the plug. Do not use the tool if the
power cord or plug is damaged. If damaged, have it repaired by a service facil-
ity before use. If the plug will not t the outlet, have a proper outlet installed by
a qualied electrician.
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
Tools marked with “Grounding Required” have a three wire cord and three prong 1.
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of electric
shock. (See 3-Prong Plug and Outlet.)
The grounding prong in the plug is connected through the green wire inside the 2.
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool’s grounding system and must never be attached to
an electrically “live” terminal. (See 3-Prong Plug and Outlet.)
Your tool must be plugged into an appropriate outlet, properly installed and ground-3.
ed in accordance with all codes and ordinances. The plug and outlet should look
like those in the following illustration. (See 3-Prong Plug and Outlet.)