Filter
Top Products
Page 3SKU 95641 For technical questions, please call 1-800-444-3353.
grounding prong or modify the plug in any way. Do not use any adapter
plugs. Check with a qualied electrician if you are in doubt as to whether the
outlet is properly grounded. If the tools should electrically malfunction or break
down, grounding provides a low resistance path to carry electricity away from the
user.
Double insulated tools are equipped with a polarized plug (one blade is wider 2.
than the other). This plug will t in a polarized outlet only one way. If the
plug does not t fully in the outlet, reverse the plug. If it still does not t,
contact a qualied electrician to install a polarized outlet. Do not change
the plug in any way. Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.
Do not abuse the Power Cord. Never use the Power Cord to carry the tools 3.
or pull the Plug from an outlet. Keep the Power Cord away from heat, oil,
sharp edges, or moving parts. Replace damaged Power Cords immediately.
Damaged Power Cords increase the risk of electric shock.
When operating a power tool outside, use an outdoor extension cord marked 4.
“W-A” or “W”. These extension cords are rated for outdoor use, and reduce the
risk of electric shock.
PERSONAL SAFETY
Stay alert. Watch what you are doing, and use common sense when operat-1.
ing this R/C Electric Racing Boat. Do not use while tired or under the inu-
ence of drugs, alcohol, or medication. A moment of inattention while operating
may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. 2.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in propellers.
Avoid accidental starting. Be sure the Power Switch is off before plugging 3.
in. Carrying this R/C Electric Racing Boat with your nger on the Power Switch
invites accidents.
Do not overreach. Keep proper footing and balance at all times. 4. Proper foot-
ing and balance enables better control.
Use safety equipment. Always wear eye protection. 5. Always wear ANSI-ap-
proved safety goggles and work gloves when using or performing maintenance on
this product.