Filter
Top Products
Page 2SKU 92953 For technical questions, please call 1-800-444-3353.
Construction
Overall Dimensions
Beam Scale
Dial Scale
Accuracy
SPECIFICATIONS
ITEM DESCRIPTION
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
PVC
9-3/16” L x 2-15/16” W x .605” T
6” in .100” increments; 130 mm in 10 mm increments
1/128” per line
±.001”
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP PRODUCT USAGE AREA CLEAN. Cluttered areas invite injuries.
2. KEEP CHILDREN AWAY FROM PRODUCT USAGE AREA. Do not allow chil-
dren to handle this product.
3. USE EYE PROTECTION. Wear ANSI approved safety impact eye glasses. ANSI
approved safety impact eye glasses are available from Harbor Freight Tools.
4. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that
it will operate properly and perform its intended function. Check for damaged
parts and any other conditions that may affect its operation. Replace or repair
damaged or worn parts immediately.
5. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only iden-
tical replacement parts. Only use accessories intended for use with this product.
Approved accessories are available from Harbor Freight Tools.
6. MAINTENANCE: Service and maintenance should be performed regularly by a
qualified technician.
7. USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain applica-
tions for which this product was designed. Do not use a smaller tool to do the
work required by a larger industrial size tool. Do not use this product for a pur-
pose for which it was not intended.
8. KEEP THE CALIPER FREE FROM WATER, OIL, SOLVENTS, ETCETERA.