Harbor Freight Tools 91132 Model Vehicle User Manual


 
Flying the Model:
1. Fly your plane in a school yard, park or indoor in a gym. (Follow the warnings
in this manual.) Make sure all bystanders are kept well clear of the flying field.
2. For the first flight, wind the propeller 200 turns. (FIG 4)
3. Hold the plane under the wing with one hand and propeller with another hand.
4. Release the propeller, toss the plane forward & up at a shallow climb. (FIG 5)
5. Observe the flight pattern of your plane; it should turn in a left circle. To make
the circle smaller, pinch the back of the right wing tip down slightly. (FIG 6) To
make the circle larger, pinch the back of the left wing tip down slightly. (FIG 6)
6. The horizontal tail can also be pinched up or down to make flight smoother.
7. For long flights, you can wind your plane up to 300 turns by hand maximum.
8. If you have a professional winder, you can pull the rubber band out of the rear
of the plane to twice its length and wind to 400 turns maximum. (Warning:
never wind over 300 turns by hand, a breaking rubber band is dangerous!).
Repairing:
If the foam cracks, apply small amount of white
glue to the break and hold firm with scotch tape
or pin until dry. Remove the tape or pin when
you are ready to fly again (FIG 7).
HAPPY FLYING!