Filter
Top Products
Specification:
Wing span: 29.85 cm (11.75 inch)
Fuselage: 27.60 cm (10.875 inch)
Horizontal tail wing: span 11.43 cm (4.5 inch); width 4.76 cm (1.875 inch)
Vertical tail wing: height 5.715 cm (2.25 inch); width 5.08 cm (2 inch) Tapered
In air weight: 34 g (1.2 ounce)
Flying duration: 10-20 seconds
Power: rubber band
Propeller: 12 x 10 cm (diameter 4.75 inch by pitch 3.9 inch)
Parts:
1 Fuselage
2-1 Left wing
2-2 Right wing
2-3 Horizontal tail wing
3 Propeller
4 Landing gear
5-1 Rubber band
5-2 Tail hook
6 Wire hook
2-1 & 2-2 & 2-3 in one set
5-1 & 5-2 in one set
ssembly:
A
. Remove the taped covers from the wing and tail mounts. (FIG 1)
1)
e with tail hooked first.
1
2. Press wing panels and horizontal tail wing to fuselage mounts. (FIG
3. Insert landing gear wire onto nose slot. (FIG 2).
4. Install the rubber band 3 loops inside the fuselag
5. Hook propeller to rubber band mounted in fuselage already. (FIG 3).
6. Check to make sure there is no binding of rubber band.