Filter
Top Products
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T26413,
T26414, & T26415
ARBOR PRESS
INSTRUCTIONS
COPYRIGHT © NOVEMBER, 2013 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS16037 PRINTED IN CHINA
V1.11.13
Introduction
This arbor press is designed to perform small
press jobs, such as staking, riveting, and install-
ing/removing bearings. The ram accepts dies,
inserts, or other tooling for custom work.
Material under pressure
could fly apart and cause
impact injuries. Always
wear safety glasses when
using this press.
Keep hands and fingers
away from the ram when
applying downward pres-
sure to avoid pinching inju-
ries.
Specifications
T26413
Press Capacity ........................................... 1 Ton
Throat Depth.....................................................4"
Maximum Workpiece Height .........................6
1
⁄8"
Ram Size ................................................... 1" x 1"
Ram Bore .....................
1
⁄2" Diameter x
1
⁄2" Deep
Base Size ....................................... 6" W 10
1
⁄2" D
Overall Size ..................... 7
1
⁄4" W x 11" D x 13" H
Weight .......................................................32 lbs.
T26414
Press Capacity ......................................... 2 Tons
Throat Depth.....................................................6"
Maximum Workpiece Height ............................8"
Ram Size ............................................ 1
1
⁄4" x 1
1
⁄4"
Ram Bore .....................
1
⁄2" Diameter x
1
⁄2" Deep
Base Size ........................................8" W x 16" D
Overall Size ............... 11
1
⁄2" W x 16
1
⁄2" D x 18" H
Weight .......................................................68 lbs.
T26415
Press Capacity ......................................... 3 Tons
Throat Depth..................................................6
1
⁄4"
Maximum Workpiece Height .......................12
3
⁄4"
Ram Size ............................................1
1
⁄2" x 1
1
⁄2"
Ram Bore .....................
1
⁄2" Diameter x
1
⁄2" Deep
Base Size ........................................8" W x 18" D
Overall Size ............... 11
1
⁄2" W x 18" D x 21
1
⁄2" H
Weight .....................................................108 lbs.
This arbor press is designed to only be
used for small parts. Do not use this arbor
press for operations beyond its capacity or
modify it for increased leverage.
Model T26414
Shown
Figure 1. Model T26414 arbor press.