Filter
Top Products
28
1. Remove both LATCH
connectors and the tether
connector from the storage
bars and extend LATCH to
its maximum length for
ease of installation.
2. Place the child restraint
firmly against the back of a
forward-facing vehicle seat
with LATCH lower anchors.
3. Hook LATCH Connectors
to vehicle lower anchors
➊.
Pull firmly on Connectors
to be sure they are attached
➋.
Belt must lay flat and
not be twisted.
4. Tighten LATCH by
pushing down hard on
child restraint and pulling
the adjustment belt
➌
.
➋
g
r
a
c
o
b
a
b
y
.
c
o
m
➌
g
r
a
c
o
b
a
b
y
.
c
o
m
➊
WARNING: Use vehicle belt (not LATCH connectors) for
installations with children weighing more than 48 pounds
(21kg). NOTE: that some vehicle manufacturer’s have lower
maximum weight ratings for LATCH anchors, so you must
consult your vehicle owner’s manual or call the vehicle
manufacturer to confirm the limits on your vehicle’s
LATCH anchors.