Filter
Top Products
13
c) Pull strap ends through
slots ➍ and reinsert them in
the correct slots ➎ as
determined in step 4,
page 12.
Check that the straps
are not twisted.
d) Reassemble straps onto
metal junction plate exactly
as shown ➏. Check that
straps are completely within
the slots and that they are
not twisted.
e) Check that the straps
are inserted at the same
level and that they are not
twisted. A twisted belt may
keep the harness from
working properly. Pull on
harness to make sure it
is secure.
➍
➏
➎