Filter
Top Products
22
LATCH Belt Routing:
LATCH belt MUST be routed through
the proper openings depending on direction
of child restraint use.
A Remove pad from front of seat area by
pulling out 2-button clips on lower front
edge of child restraint (fig. h) and
2-button clip in center of seat.
Removing pad will expose the rotating
LATCH belt. (fig. i)
B Rotate LATCH belt so that the belt routes
through the proper openings (Pg 23,
fig. k and fig. l). Belts must remain flat
and tight against the child restraint
BEFORE reattaching the three seat pad
2-button clips. (fig. j) LATCH belt must not
interfere with the harness.
C Re-attach pad to child restraint by
snapping the three 2-button clips back in
place. DO NOT allow 2-button clip to
interfere with the LATCH belt or vehicle
seat belt.
8
OPERATIONS and ADJUSTMENTS (continued)
(fig. h)
(fig. i)
Rotating LATCH Belt
(under seat pad)
(fig. j)
Belt must be
flat and tight