Filter
Top Products
16
Parts List
Fig. 1.1 5-point safety buckle
Fig. 1.2 Harness adjuster
Fig. 1.3 Angle adjustment button
Fig. 1.4 Secondary latch
Fig. 1.5 Top bar juncture
Fig. 1.6 Rear facing seat belt hook
Fig. 1.7 Body
Fig. 1.8 Protective shoulder straps
Reclining Adjustment
After adjustment, please move the car seat back and forth to make sure if
the car seat is securely fastened to the vehicle seat.
Forward Facing Mode (for child between 9~18kg)
There are four reclining angles 1~ 4
(Fig. 5). Simply press the angle adjustment
button to adjust the car seat angles (Fig. 4) – Push up.
Rear Facing Mode (for child under 13kg)
Press the secondary latch first and then the reclining adjustment button
(Fig. 6).
Car seat installed in this mode MUST be adjusted to angle 5 (Fig. 5).
Beware of finger entrapment when performing this task.
Shoulder harnesses Height Adjustment
Improper adjustment of shoulder height may throw your child off the car
seat when accident occurs.
Make sure the shoulder height is not too high or too low before installing
this car seat.
1 Open the rear cover located at the seat back
(Fig. 7)
2 Move the slide lever up or down by pressing the harness height adjuster
button (Fig. 8). There are four pitches of shoulder height for adjustment.
3 Adjust the shoulder harness to appropriate height of insertion outlet cover
after the height adjustment
(Fig. 10).
Fig. 2.1 Rear facing seat belt
Fig. 2.2 Lock-off latch for forward
facing mode
Fig. 2.3 Front belt cover
Fig. 2.4 Base
Fig. 2.5 Rear cover
Fig. 2.6 Instruction manual
Fig. 2.7 Harness height adjuster
button
Fig. 3 Anti-slippery pad