Filter
Top Products
Operation
3A0101B 7
Starting the Engine
3. Engage Rear Wheel Brake (G) to prevent Grind-
Lazer from moving.
4. 480 Models Only: Attach LineDriver to GrindLazer.
5. Push down on handle bars until drum is locked into
UP position.
6. 480 Models Only: Make sure Engine Stop Switch
(C) is in UP position.
7. Start Engine:
a. Move fuel valve to open.
b. Move choke to closed.
c. Set Engine Power Switch (B) to ON.
d. Pull starter cord.
e. After engine starts, move choke to open.
f. Set throttle to desired setting.
ti14754a
ti15089a
ti14758a
ti15088a
ti5248a
480 Models270/390 Models
ti5249a
480 Models270/390 Models
ti3315a
ti14872a
270 & 390 Models
480 Models
ti5263a
TIA
480 Models270/390 Models
ti6483a