Graco 3-in 1 Car Car Seat User Manual


 
34
10.3 With LATCH
Use vehicle belt (not LATCH connectors) for
installations with children weighing more than
48 pounds (21.7 kg). NOTE: Some vehicle
manufacturers have lower maximum weight
ratings for LATCH anchors, so you must
consult your vehicle owner’s manual or call the
vehicle manufacturer to confirm the limits on your
vehicle’s LATCH anchors.
1. Unhook LATCH from storage bars on the
sides of the seat. For ease of installation, extend
LATCH to its maximum length.
2. Place the child restraint firmly against the back
of a forward-facing vehicle seat.
3. Hook LATCH Connectors to vehicle lower
anchors
. Pull firmly on Connectors
to be sure they are attached. Belt must
lay flat and not be twisted.
4. Tighten LATCH by pushing down hard on
child restraint and pulling the adjustment belt .
5. If you need to remove LATCH to readjust,
pull up on LATCH plate to loosen strap.