Graco 3635 High Chair User Manual


  Open as PDF
of 6
 
9
231-3-99 IS3549
10
Replacement Parts
Instructions for ordering highchair parts:
Complete form below. Your highchair model number
MUST be included on the form to ensure proper
replacement parts. Your model number can be found
on a sticker on the back of the footrest. Payment
must accompany your order.
Return the form below with payment to:
GRACO CHILDRENS PRODUCTS INC.
CUSTOMER SERVICE DEPARTMENT
P.O. BOX 100, MAIN STREET
ELVERSON, PA 19520
IF YOU NEED HELP
If you have any questions or if you need any part
not listed, please call toll-free:
1-800-345-4109
or visit our Internet website, www.gracobaby.com
Model Number
(Must be filled in)
SHIP TO:
Name
Address
City, State, Zip
( )
Telephone
Total:
Shipping
& handling: $5.00
6% sales tax
(PA only):
Total amount
due:
Check enclosed
(payable to Graco Childrens
Products Inc.)
Charge to credit card:
Visa
MasterCard
Discover
Account #:
Expiration date:
Signature:
Seat
Seat pad
Seat belt
Harness
Tray
Support tube
Rear tube
Front tube
Upper tube
Recline bracket
Recline bar
Foot
Hardware
Parts List:*
Seat....................................
Seat pad.............................
Seat belt*............................
Harness*.............................
Tray.....................................
Support tube.......................
Rear tube............................
Front tube...........................
Upper tube..........................
Recline bracket (2).............
Recline bar..........................
Foot (each).........................
Hardware.............................
* On certain models only.
Price:**
$22.00
$13.00
$ 5.00
$ 5.00
$19.00
$7.00
$10.50
$10.00
$ 9.50
$ 7.00
$ 5.00
$ 5.00
$ 5.00
** Prices subject to change without notice.
To Fold Highchair
Lay highchair on the floor as
shown. Press in and hold the
metal buttons at base of both
plastic brackets, then push
rear leg tube down to fold
highchair.
To Adjust Height
DO NOT
adjust the highchair with
your child in it.
Adjust seat to upright position.
Hold chair frame down
and lift top of plastic seat
firmly to free pegs from
height-adjustment notch.
Slide seat up or down in
the track, then snap it into
desired height setting.
When adjusting height,
be careful to keep fingers
away from the height-
adjustment track.
There are five possible
height settings. The highchair
can be used as a toddler chair
by adjusting to the lower
height settings.
CHECK that both sides of
chair are snapped into the
desired height-adjustment
notch.
Pull UP
To Adjust Recline
DO NOT adjust
the highchair with your child
in it.
Pull up on the recline bar at
back of seat to release the
seat. Then pull or push seat
to the desired recline position.
After adjusting recline, push
down on recline bar to lock
seat.
Seat can be adjusted to three
different recline positions.
CHECK that both sides of the
chair are snapped into the
desired recline notches.
Do not use tray when seat is
in a recline position.
Push on
front button
If it becomes necessary to remove the seat belt for
cleaning or replacement, follow these instructions:
Step 1.
Remove seat pad. Unthread end
of seat belt through the buckle as
shown.
To Use Tray
Place tray on armrests of seat.
Pull out side handles under the
tray. Put tray in one of the five
adjustment positions, and
release side handles.
CHECK that tray is securely
attached by pulling forward
on the tray.
Use either the side handles
or the front button to adjust or
remove the tray.
DO NOT force
the tray against your child.
Keep your childs hands and
fingers away from the tray
when adjusting the tray.
11 12
Step 2.
Pull other end of the seat belt
through the belt retainer as shown.
Step 3.
To rethread buckle, reverse the above steps. CHECK that
the belt is threaded correctly by pulling on the seat belt.
The belt should not slip through the buckle.
WAIST BELT MODELS
(For 5-point harness models, see preceding section.)
To Attach Seat Pad
Step 1.
Attach seat pad by sliding
pocket over the back of the
seat as shown. Then hook
sides of pad over the two
tabs on each side of the
highchair.
Step 2.
Pull the seat belt through the
hole in the middle of the seat
pad.
Step 3.
Push the two tabs on the
bottom of the seat pad into the
two slots in the bottom of the
seat as shown.
From the rear of the footrest,
pull the two tabs over the
plastic anchors near them.
To Secure Your Child
Snap buckle together as
shown. Adjust belt as needed
to get a snug fit around your
child.
To release, squeeze buckle
at sides.
Tabs
 previous