Graco 1000 STETM Bouncy Seat User Manual


 
ADDITIONAL INFORMATION
20
Vehicle may already be equipped with a tether
anchor (top strap anchor). See vehicle owner’s
manual for location.
If vehicle does not have a tether anchor, one
must be installed:
Contact vehicle dealership for proper
anchor location and installation.
Before installing anchor, install car seat on
a vehicle seat and check that the lap belt
portion of the vehicle belt will hold car seat
securely. If not, move car seat to another
seating position.
Installation of Anchor Hardware
Anchor Har
dware
Bolt
Washers (2)
Nut
Anchor Ring
Lock Washer
Avoid serious injury or death:
Be sure anchor hole is properly sealed
to prevent exhaust fumes and water
from entering the vehicle.
If you wish to remove anchor once child
outgrows car seat, make sure hole is
properly plugged or sealed to prevent
exhaust fumes from entering the
vehicle.
WARNING