GM JDP40 Model Vehicle User Manual


 
13
Using the clock and timer.
Not all features are on all models.
To Set the Clock
The clock must be set for the automatic
oven timing functions to work properly.
The time of day cannot be changed during
a timed baking or self-cleaning cycle.
Press the
CLOCK
pad.
Press the
INCREASE
or
DECREASE
pad
to set the time of day.
Press the
CLEAR/OFF
pad to start, or
the clock will automatically start after
6 seconds.
Make sure the clock is set to the
correct time of day.
To Set the Kitchen Timer
Press the
KITCHEN TIMER ON/OFF
pad.
Press the
INCREASE
or
DECREASE
pad
to set the amount of time on timer.
The kitchen timer will start automatically
within a few seconds of releasing the pad.
The kitchen timer, as you are setting it,
will display 5- second increments until
2 minutes is reached.
It will display 10-second increments until
10 minutes is reached.
It will display 1-minute increments until
1 hour is reached.
After 1 hour, it will display 5-minute
increments until the maximum time of
9 hours and 55 minutes is reached.
KITCHEN
TIMER
ON OFF
The kitchen timer is a minute timer
only.
The kitchen timer does not control
oven operations. The maximum
setting on the kitchen timer is 9
hours and 55 minutes.
End of Cycle Tones
The end of cycle tone is a series of 3 beeps
followed by 1 beep every 10 seconds for
5 minutes (or until the
KITCHEN TIMER
ON/OFF
pad is pressed).
To Reset the Kitchen Timer
If “TIMER” is displayed, press the
INCREASE
or
DECREASE
pad until the
desired time is reached.
If “TIMER” is not displayed, press the
KITCHEN TIMER ON/OFF
pad first, then
follow the instructions above to set the
kitchen timer.
To Cancel the Kitchen Timer
Press the
KITCHEN TIMER ON/OFF
pad until
the word “TIMER” disappears from the
display.
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting Tips
Safety Instructions
Customer Service