Filter
Top Products
Manual GEMINI
Version: Sept. 2006
6
Adjusting the height of the back
After loosening the two bolts (M6 – located at the rear of the back at both sides of the adjustment bar),
the head support can be moved upwards or the back can be shortened between 51 and 64 cm. The
two bolts needs to be tightened again after making such an adjustment.
Two holes have been provided in the head support, which are needed for the safety belt. This is an
additional adjustment depending on the personal needs of each user.
L Make sure all connections and bolts are secured before using the Gemini!
L It is not allowed to add more weight to the back (example: a backpack or shoppinbag). This will
cause overweight at the back and may cause the Gemini to trip backwards, which can cause injuries
to the user of the Gemini! Adding additional elements to the Gemini is only allowed after careful
consideration and in collaboration with one of our retailers.