Filter
Top Products
1
1.
INSTALLATION
1.1 Installation of Display Unit
Mounting considerations
The display unit can be installed on a tabletop, on the overhead, or in a
panel (optional flush mounting kit required). Refer to the outline drawings
at the end of this manual for installation instructions. When selecting a
mounting location, keep in mind the following points:
• Locate the unit away from exhaust pipes and vents.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• Locate the unit away from equipment which generates electromagnetic
fields such as a motor or generator.
• Allow sufficient maintenance space at the sides and rear of the unit and
leave sufficient slack in cables, to facilitate maintenance and servicing.
• Observe the following compass safe distances to prevent deviation of a
magnetic compass.
Standard compass, 0.35 m, Steering compass, 0.25 m.
Tabletop and overhead mounting
Tabletop
Overhead
Figure 1-1 Tabletop and overhead mounting methods