Filter
Top Products
6
Yellow Support
Gas Pump
Tower Top
Assembly
Turn the assembly around so that the gas pump is facing you.•
Fit the yellow support into the sockets in the base. Push to • “snap” in place.
Fit the tower top onto the supports. Push near each of the four corners to • “snap” in place.
Hint: The tower top is designed to fit on the supports one way. If it does not seem to fit, turn it
around and try again!
4
5
Fit the supports on the assembly into the sockets in the ramp, as shown. Push to • “snap” in place.
6
Ramp