Filter
Top Products
8
8
• Fit a cap nut cover onto each rear wheel and push to “snap”
in place.
13
Cap Nut Cover
• Fit the roof assembly onto the frame. Push near each post to
“snap” in place.
Hint: The roof assembly is designed to only fit one way. If it does
not seem to fit turn it around and try again.
17
Roof Assembly
Assembly
Assembly
• Turn the frame upright.
• Fit the steering wheel onto the sounds and lights box.
• Insert three #6 x ½” screws into the steering wheel and tighten.
14
• Fit the cup holder onto the side of the frame.
• Insert a #8 x ¾” screw into the cup holder and tighten.
18
Cup
Holder
Sounds and
Lights Box
Steering Wheel