Filter
Top Products
7
Car Lift
Balconies
Elevator
Top Ramp
3 Screws
9
11
12
10
Fit the tabs on the car lift into the slots on the wall, as shown.•
Slide the elevator onto the end of the wall assembly, as shown. •
Fit the top ramp onto the assembly.•
Insert three screws into the holes in the ramp and tighten. •
Fit the balconies into the slots in the wall assembly, as shown.•
Hint: The balconies are designed to fit one way. If a balcony does
not seem to fit, turn it over and try again!
Push to "• snap" each balcony in place.
Assembly