Filter
Top Products
8
Note: Do not attach the seat tubes to the frame crossbar in this
assembly step.
• While holding the seat assembly in place, insert an M5 x 32 mm
screw into the hole in each frame tube hub. Tighten the screws
with the Allen wrench.
13
2 M5 x 32 mm
Screws
• Insert both elastic loops on the pad through the holes in the
seat back.
15
FRONT VIEW
Elastic
Loops
Holes
Pad
• First lift, and then lower the latches onto the crossbar.
14
Tabs
• Fit the ends of the seat tubes up into the holes in each frame
tube hub.
Hint: You may need the help of another adult to hold the seat
assembly in place.
12
Frame Tube Hubs
Assembly
Crossbar
Latches
BACK VIEW