Filter
Top Products
5
• Fit a foot onto the end of each base tube, as shown.
Hint: Make sure the feet curve outward.
• Insert an M4.5 x 12 mm screw into the hole in the underside of
each foot and tighten with a Phillips screwdriver.
2
Assembly
• Lift the rear and front tubes to open the frame.
1
Foot
Foot
Rear Tubes
Frame
Front Tube
Front
Tube
Base Tube
Base Tube
2 - M4.5 x 12 mm
Screws
• Position the upper frame tubes so that the hubs face each other.
• Fit the upper frame tubes into the rear frame tubes.
Hint: The upper frame tubes are designed to fit one way. If they do
not seem to fit, turn them around and try again.
4
Upper Frame Tube Hubs
Rear Frame Tubes
3
IMPORTANT! Before assembly and each use, inspect this product for
damaged hardware, loose joints, missing parts or sharp edges. DO
NOT use if any parts are missing or broken. Contact Fisher-Price
®
for
replacement parts and instructions if needed. Never substitute parts.
BOTTOM
VIEW
TOP VIEW