Filter
Top Products
MyToon TV
6
MyToon TV
Battery Installation
Hint: We recommend using alkaline batteries for longer battery life.
Base
• Locate the battery compartment on the
bottom of the base.
• Loosen the screws in the battery
compartment door, and remove the door.
• Insert four “AA” (LR6) alkaline batteries.
• Replace the battery compartment
door and tighten the screws. Do not
over-tighten.
• If the base begins to operate erratically,
you may need to reset the electronics.
Press the power button to turn power
off; press again to turn power back on.
• When function is slow or stops or you
see a low battery indicator
on
your TV screen, it’s time for an adult
to change the batteries.
Wireless Remote
• Locate the battery compartment
on the back of the wireless remote.
• Loosen the screw in the battery
compartment door, and remove
the door.
• Insert three “AAA” (LR03)
alkaline batteries.
• Replace the battery compartment
door and tighten the screw. Do not
over-tighten.
• If the wireless remote begins to
operate erratically, you may need to
reset the electronics. Remove and
replace the batteries.
• When lights on the remote stop, or
the range between the remote and
base decreases, it's time for an
adult to change the batteries.
1.5V x 4
“AA” (LR6)
1.5V x 3
“AAA” (LR03)