Filter
Top Products
MyToon TV
16
MyToon TV
Problem Cause Solution
No image on the TV TV or VCR/DVD player is
not set to the proper input
Change the TV or VCR/DVD player’s mode to
INPUT or VIDEO IN.
Press the channel down button on your TV
or VCR/DVD player to change to a channel
below channel 2.
Consult your TV or VCR/DVD player’s
instruction manual.
Batteries in the base are
weak or exhausted
Replace the batteries in the base with four,
new “AA” (LR6) alkaline batteries.
Base timed out (sleep
mode and power L.E.D.
is still on)
The base times out (sleep mode) after 10
minutes of inactivity. Press any button to
turn it back on.
Base shut down
(power L.E.D. is off)
The base will shut off after it has been in
sleep mode for five minutes. Press the
power button to turn the base OFF; press
it again to turn the base back ON.
No wireless connection
between the base unit and
the remote
Make sure you have a clear path between
the wireless remote and the base. Do not
place the base in a closed cabinet.
Troubleshooting