Filter
Top Products
4
Assembly
• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
Rear Wheel
Indented Side Down
• Place a scrap block of wood on a flat surface.
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the cap nut assembly tool under the assembled rear
wheel and onto the cap nut.
• Slide a rear wheel (indented side up) onto the end of the
straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Place a cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Gently pull the rear
wheel up to be sure the cap nut is securely attached
to the straight axle.
• Dispose of the cap nut assembly tool properly.
• Insert one of the tabs on a cover into a slot in the hubcap.
Push to "snap" the cover in place. Repeat this procedure
to attach the other cover to the other hubcap.
• Set the frame assembly aside.
Cap Nut
Rear Wheel
Indented Side Up
Cap Nut
Assembly Tool
Assembled
Rear Wheel
Straight Axle
• Turn the frame upside down.
• Insert the straight axle through the holes in the rear of
the frame.
Hole
Hole
Frame
Straight Axle
BOTTOM VIEW
Hubcap
Hubcap
Frame
Straight Axle
1
2
3
Cover
Hubcap