Filter
Top Products
Handle Tubes
Back Base
• While pressing the buttons on the ends of the back base,
insert it into the tubes in the handle. Make sure the back
base “snaps” into place.
• Pull the back base to be sure it is secure to the handle tubes.
PRESS
PRESS
• Turn the assembly upright.
• Position the soothing unit upright and fit the groove to the
front base, as shown.
• Insert two 4 mm x 30 mm screws through the front base
and into the soothing unit. Tighten the screws.
Soothing Unit Groove
Front Base
3
4
5
Assembly