Filter
Top Products
Turn Tube Ends Up
• Place the seat back tube face down, as shown.
• Turn the ends of the tube upright.
Seat Back Tube
IMPORTANT! Before assembly, inspect this product for
damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use if any parts are missing or broken. Contact
Mattel for replacement parts and instructions if needed.
Never substitute parts.
4
Assembly
1
• Insert the ends of the front base into the holes in the handles.
Hint: If you cannot insert the front base into the handles,
turn the seat back tube over and try again!
• Insert two 4 mm x 20 mm screws through the hole in the
handles and the ends of the front base. Tighten the screws.
Hint: If the screw does not easily insert through the hole
in the handle and front base, you may not have pushed
the front base completely into the handle. Push the front
base into the handle to align the holes and then insert
the screw.
Seat Back Tube Handles
Front Base
2