Filter
Top Products
7
Assembly
• Fit the hooked tab on each accessory bin into the slot in
each leg.
Slot
• Insert two #6 x
3
/4” chrome screws into the artist’s tray and
each accessory bin. Tighten the screws.
Accessory
Bin
Accessory
Bin
Hooked
Tab
15 16
• Position the back panel with ribbed side facing you and the
tabs at the top.
• First, fit the bottom edge of the back panel into the slot in the
legs
A
. Then, fit the back panel tabs onto the columns
B
.
Back Panel
A
A
B
• Insert four #6 x
3
/4” chrome screws into the back panel
and tighten.
11
12
Tabs