Filter
Top Products
5
Assembly
• First, insert two #8 x 1” gold tone screws through each leg
and into the artist’s tray. Tighten the screws.
7
• Then, insert two #6 x
3
/4” chrome screws through the
artist’s tray and into each leg. Tighten the screws.
8
• Fit the cap to the top of the easel board.
• Make sure the tab on each end of the cap fits into the slots
in the top of the easel board.
Cap
• Place the easel board face down again.
• Insert five #6 x
3
/4” chrome screws into the easel board
and tighten.
• Set the easel board assembly aside.
3
4